Every forum I've been on has always ha a pay it forward thread to pass on goodies to other members. I just took off a perfectly good set of grip buddies cut to fit off my bike. I will ship these free of charge to the first person that once them. Lower 48 only please.
Okay, how about this. I have a bead rider that I only used a couple of times. You pay for shipping (lower 48 States) and it's yours. First to PM me gets it.
Brand new Schuberth C2 liner purchased to eliminate the "hot spot" at forehead center on the C3. It is a perfect fit in the C3 and as advertised, it doesn't have the seams in the center of the forehead giving you that attractive "klingon" stripe. The problem in my case is that the C2 liner is a little more padded (evenly across the front) and makes the helmet fit too tight for my oblong head.
Size XL. This should fit any helmet XL and up. L and smaller use a different liner size. I paid $49 but free to a good home; just send me $5.30 for Priority Mail shipping.
Brand new Schuberth C2 liner purchased to eliminate the "hot spot" at forehead center on the C3. It is a perfect fit in the C3 and as advertised, it doesn't have the seams in the center of the forehead giving you that attractive "klingon" stripe. The problem in my case is that the C2 liner is a little more padded (evenly across the front) and makes the helmet fit too tight for my oblong head.
Size XL. This should fit any helmet XL and up. L and smaller use a different liner size. I paid $49 but free to a good home; just send me $5.30 for Priority Mail shipping.
The S2 liner works wonders.... Can't believe the difference a simple upgrade makes.... I had some warranty work done my helmet and they through the S2 liner in for my troubles.. Great customer service on this helmet!!!
I just upgraded to latest generation of SPOT GPS Tracker so I now have a perfectly usable Gen 1 available to the first person who wants it. Just pay $10 for shipping and it is yours. I don't have a manual but I am sure you can find one online, and it is very simple to use.
I just upgraded to latest generation of SPOT GPS Tracker so I now have a perfectly usable Gen 1 available to the first person who wants it. Just pay $10 for shipping and it is yours. I don't have a manual but I am sure you can find one online, and it is very simple to use.
I have car cradle for a Nav IV. Although it fits the Nav V, it doesn't have the necessary built in speaker to make it useful. Works great for the Nav IV. Free to someone who needs it and is willing to cover the $5.15 Priority Mail to ship to the U.S.
I have a second generation (current version available is third generation) PDM60 power distribution module. It has served me very well for almost 2 years in my K1600GT. When this version was supplied, it was not programmable and didn't include a USB programming cable. It is pre-programmed with three 15A channels and three 5A channels.
I don't know whether the firmware can be updated by Rowe Electronics or RocketMoto to the more recent programmable version. You'd have to inquire. However, as is, it works very well. I ran 2 heated clothing circuits (15A each), a lighting circuit for my amber running lights and Darlas (5A), and a power circuit for my Digital Dash (5A). I will include the original manual (double-sided sheet) supplied with the unit. For photos of the actual PDM60, see this thread: http://www.k1600forum.com/forum/bmw...m60-accessory-outlets-clearwater-glendas.html It will also have the large waterproof multi-pin connector shown (except it's black instead of grey, now).
Free with $5.15 Priority Mail shipping cost to the U.S. Hope this is helpful to someone!
I have a second generation (current version available is third generation) PDM60 power distribution module. It has served me very well for almost 2 years in my K1600GT. When this version was supplied, it was not programmable and didn't include a USB programming cable. It is pre-programmed with three 15A channels and three 5A channels.
I don't know whether the firmware can be updated by Rowe Electronics or RocketMoto to the more recent programmable version. You'd have to inquire. However, as is, it works very well. I ran 2 heated clothing circuits (15A each), a lighting circuit for my amber running lights and Darlas (5A), and a power circuit for my Digital Dash (5A). I will include the original manual (double-sided sheet) supplied with the unit. For photos of the actual PDM60, see this thread: http://www.k1600forum.com/forum/bmw...m60-accessory-outlets-clearwater-glendas.html It will also have the large waterproof multi-pin connector shown (except it's black instead of grey, now).
Free with $5.15 Priority Mail shipping cost to the U.S. Hope this is helpful to someone!
KJ, I sent another PM but may not have done it correctly so I will repeat it here.
I can ship the windshield UPS today and and you can send me a check or you can send a shipping label and I will ship when received. It is up to you. ( I trust you to send a check)
KJ, I sent another PM but may not have done it correctly so I will repeat it here.
I can ship the windshield UPS today and and you can send me a check or you can send a shipping label and I will ship when received. It is up to you. ( I trust you to send a check)
I have a brand-new, never used set of Hippo Hands: BMW They were a gift but I've never had severe enough winter conditions to try them. $11 shipping in a medium Priority Mail box.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
BMW K1600 Forum
661.1K posts
23.8K members
Since 2010
A forum community dedicated to BMW K1600 Motorcycle owners and enthusiasts. Come join the discussion about performance, accessories, modifications, touring, classifieds, troubleshooting, maintenance, and more!