General Information
Year
2018
Make
BMW
Model
K1600B
Color
Black with red highlights
Packages
All options
History
Original owner
2018 BMW K1600B (Black with red highlights)
Modifications
Exterior
1” lowering kit from GARS
Removed ~2” foam from seat, this standard seat is now lower than low seat
Added chrome spikes/bullets at windshield, lick plate and above lic plate
Attached water bottle holder on passenger handle.
Attached GPS pouch to center of handlebars
Removed ~2” foam from seat, this standard seat is now lower than low seat
Added chrome spikes/bullets at windshield, lick plate and above lic plate
Attached water bottle holder on passenger handle.
Attached GPS pouch to center of handlebars
Audio
Added soft foam tubes to hand grips.
Tye wrapped GPS to handlebar Triple tree
Secured thermos drink holder to passenger handle hold.
Tye wrapped GPS to handlebar Triple tree
Secured thermos drink holder to passenger handle hold.
Suspension
Standard seat after removing about 2” of foam.
Wheel and Tire
Pictured above and here are components used when not utilizing the two windshield plastic chrome mount clamps.
Secure windshield with assoc mount screws. Use the 1/2” OD flat plumbing washers as spacers and black hinged screw covers from LOWES to hide the screw heads. Also, use nylon hole plugs (silicone adhesive glue to secure plugs) for the center windshield holes, which do not use the hinged screw covers. Do not use metal washers on windshield, they will cause small stress cracks. I also placed a 1.25” thin rubber washer between windshield and mount bracket for bottom screws.
Secure windshield with assoc mount screws. Use the 1/2” OD flat plumbing washers as spacers and black hinged screw covers from LOWES to hide the screw heads. Also, use nylon hole plugs (silicone adhesive glue to secure plugs) for the center windshield holes, which do not use the hinged screw covers. Do not use metal washers on windshield, they will cause small stress cracks. I also placed a 1.25” thin rubber washer between windshield and mount bracket for bottom screws.
