[RefCat]

You have choices. If the max current of your lights is under 10A continuous, I'd put them on one circuit and use either program 3 or program 4. That leaves you with an option for connecting a horn that you otherwise do not get.


If you're using program 1, you hook up one Denali light to the red wire-set and the other to the orange wire-set. Denali Red and yellow both to exCAN red on one and the other Delani Red & Yellow to the exCAN orange. (If using program 2, swap red to yellow and orange to white on the ezCAN).

If you're using program 3 or 4, you short your Denali lights together and 3 wires into 2 like above as well....all Denali Reds and Yellows into one then to the ezCAN red (program 4) or ezCAN orange (program 3). Regardless of the program, the Denali blacks all connect to an ezCAN black.