I've never transferred the backing plate from one pad to another.
Duane
Duane
Front brake pad replacement - transfer the shims?
Hello folks,
I hope this doesn't sound too much like a foolish question, but when replacing the OEM pads with EBC pads, are we supposed to transfer those thin OEM shims from the old pads to the new? I would assume so, but when I looked at the part schematic on the MAX BMW site, it doesn't show the shims as a separate part. I did watch this video though from James Truxal where he shows that he does in fact transfer the shims to the new pads. Thanks in advance for your help!
I hope this doesn't sound too much like a foolish question, but when replacing the OEM pads with EBC pads, are we supposed to transfer those thin OEM shims from the old pads to the new? I would assume so, but when I looked at the part schematic on the MAX BMW site, it doesn't show the shims as a separate part. I did watch this video though from James Truxal where he shows that he does in fact transfer the shims to the new pads. Thanks in advance for your help!
1 - 6 of 6 Posts
Duane @Gunnert ...do you use any kind of anti-squeal lubricant on the backs of the new pads? I don't know if that is the reason for the shims on the OEM pads or not (to keep them from squealing?).I've never transferred the backing plate from one pad to another.
Duane
Nope, no, never used anti-squeal lube on bike pads.
Duane
Duane
I always reuse them on newer pads, also put some cooper grease between the shims, pads and the pistons.
Enjoy bricos!
Enjoy bricos!
1 - 6 of 6 Posts
BMW K1600 Forum
A forum community dedicated to BMW K1600 Motorcycle owners and enthusiasts. Come join the discussion about performance, accessories, modifications, touring, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
